成人又黄又爽又色的视频,欧美亚洲综合成人a∨在线,国产亚洲精品成人无码精品网站,成年无码av片在线蜜芽,白白色发布永久免费观看视频

G3548 ul證書編號:E41938

G3548 物性表: G3548物性表及特性介紹,G3548注塑參數詳情,如需G3548下載, 可到相關下載區下載

品名(產品大類): Elastomer(Rubber)
阻燃等級(Flame Class): -
熱絲著火性(HWI): f
高電流電弧著火性 (HAI): b
比較導電徑跡(CTI): b
電氣強度(RTI Elec): b
機械沖擊(RTI Imp): b
機械強度(RTI Str): b
ul證書編號: E41938
UL廠家: E I DUPONT DE NEMOURS &amp; CO INC

su-jiao.com/ul/ UL黃卡查詢	E41938
E I DUPONT DE NEMOURS & CO INC
ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713
G3548
Thermoplastic Elastomer (TPE), elastomer-ether-ester, "Hytrel", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC	0.79	-	4	0	50	50	50
	1.5	HB	3	0	50	50	50
	3.0	HB	2	0	50	50	50

Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	0	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	-

NOTE -

(1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1987-07-14 Last Revised: 2003-10-24

MAIL:sales@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.5	HB75 (NC)
			3.0	HB40 (NC)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

MAIL:sales@su-jiao.com

關鍵詞:
供應
Elastomer(Rubber)
G3548

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-11332.html

免責聲明: 本文 G3548 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡