国产无遮挡又黄又爽不要vip软件国产成人精品一区二区秒拍1o ,欧美亚洲另类制服卡通动漫,精品国产亚洲一区二区三区在线观看,国产欧美日韩精品第二区,五月天国产成人av免费观看

TC4MG(e)(a)(*) ul證書編號:E353857

TC4MG(e)(a)(*) 物性表: TC4MG(e)(a)(*)物性表及特性介紹,TC4MG(e)(a)(*)注塑參數詳情,如需TC4MG(e)(a)(*)下載, 可到相關下載區下載

品名(產品大類): Elastomer(Rubber)
阻燃等級(Flame Class): a1
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): a
機械沖擊(RTI Imp): a
機械強度(RTI Str): a
ul證書編號: E353857
UL廠家: KRAIBURG TPE TECHNOLOGY (M) SDN BHD

su-jiao.com/ul/	E353857
KRAIBURG TPE TECHNOLOGY (M) SDN BHD
LOT 1839 JALAN KPB 6, KAWASAN PERINDUSTRIAN BALAKONG, SERI KEMBANGAN SELANGOR 43300 MY
TC4MG(e)(a)(*)
Thermoplastic Elastomer (TPE), "Thermolast K", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
ALL	1.5	HB	-	-	-	-	-
	3.0	HB	-	-	-	-	-

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(*) -	represents an underscore "_" followed by a combination of 4 or 5 alphabets and/or digits indicating packaging information.
(a) -	no extension or (-) and 3 digits indicating color
(e) -	"A" or "Z" indicating color of base material

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2003-08-15 Last Revised: 2012-03-14

郵箱:admin@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.5	HB75 (ALL)
			3.0	HB40 (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

郵箱:admin@su-jiao.com

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-10466.html

免責聲明: 本文 TC4MG(e)(a)(*) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡