| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 15 g/10 min @Load 2.16 kg, Temperature 250 °C |
15 g/10 min @Load 4.76 lb, Temperature 482 °F |
cm3/10 min; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Modulus | 10.8 GPa | 1570 ksi | |
| Electrical Properties | Metric | English | Comments |
| Comparative Tracking Index | 250 V | 250 V | Test Solution A; IEC 60112 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 350 °C | 662 °F | Short-term heat resistance depending on the radiation dose (300 kGy), measured at 3.2 mm UL test bars. |
| Deflection Temperature at 0.46 MPa (66 psi) | 221 °C | 430 °F | ISO 75-2 |
| Flammability, UL94 | V-0 @Thickness 0.800 mm |
V-0 @Thickness 0.0315 in |
|
圖：
上海松翰塑化科技有限公司！本公司承諾，假一賠百！所有產品都是原廠家，原包裝一線獨家營銷！
我司所銷售所有產品均為原廠原包，均可提供相關資料報告（如：物性表，MSDS報告，UL報告，COA報告，SGS報告，F(xiàn)DA等）！
歡迎新老客戶來電或QQ咨詢：
聯系人：李先生
聯系電話；13636696005
聯系QQ；1020580970
聯系郵箱；1020580970@qq.com