- 密度 [g/cm3]: 1.6
- 吸水率 [%]: 0.44
- 缺口沖擊強度: 0.191
- 彎曲強度 [MPa]: 57.0
- 彎曲模量 [MPa]: 8.60
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.580 g/cc | 0.0210 lb/in3 | ASTM D1895 |
| Density | 1.60 g/cc | 0.0578 lb/in3 | ASTM D792 |
| Water Absorption | 0.44 % | 0.44 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0069 cm/cm | 0.0069 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 57.0 MPa | 8270 psi | ASTM D638 |
| Elongation at Break | 0.71 % | 0.71 % | ASTM D638 |
| Tensile Modulus | 10.2 GPa | 1480 ksi | ASTM D638 |
| Flexural Strength | 85.0 MPa | 12300 psi | ASTM D790 |
| Flexural Modulus | 8.60 GPa | 1250 ksi | ASTM D790 |
| Compressive Strength | 168 MPa | 24400 psi | ASTM D695 |
| Izod Impact, Notched | 0.191 J/cm | 0.358 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.215 J/cm2 | 1.02 ft-lb/in2 | ASTM D256 |
| Impact | 99 | 99 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.60e+12 ohm-cm | 1.60e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 7.3 | 7.3 | ASTM D150 |
| Dielectric Strength | 5.80 kV/mm | 147 kV/in | Step by Step; ASTM D149 |
| 7.70 kV/mm | 196 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.074 | 0.074 | ASTM D150 |
| Arc Resistance | 186 sec | 186 sec | ASTM D495 |
| Comparative Tracking Index | 475 V | 475 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 155 °C | 311 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 186 °C | 367 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.96 % | 0.96 % | 240 hr, 105oC; ASTM D1299 |